Compression Test Kit

This comprehensive kit includes everything required to perform dry and wet engine cylinder compression tests commonly used to detect ring or cylinder head problems, sticking valves, blown head gasket(s), and more. Includes adapters for use on motorcycles, marine, and small engines, and an air-hold adapter for performing valve seal repairs without removing the cylinder head(s). Not for use on diesel engines.

• Compression Test Kit
• Type Compression Test Kit
• Shipping Weight 3.5 Pound
• Pressure Rating 300 PSI
• Kit Contents (1) 2-3/4 Inch Gauge with High Impact Lens, Rubber Boot, and (4) Scales of Measure Attached to 10 Inch Hose and Quick Release Coupler, (1) 14 Millimeter Short-Thread Adapter with 6-1/2 Inch and 12 Inch Hose, (1) 14 MM Long-Thread Adapter with 12 Inch Hose, (1) 18 Millimeter Short-Thread Adapter with 12 Inch Hose, (1) 14 Millimeter Short-Thread x 18 Millimeter Long-Thread Adapter, (1) 10 Millimeter Thread Small Engine Adapter, (1) 12 Millimeter Thread Small Engine Adapter, (1) Quick-Release Air Hold Adapter
• (1) Custom Blow-Molded Case, (1) Field Service Kit, (1) User Manual (English/Spanish/French)
• Application Compression Testing, Gasoline

Features:

• Manual pressure release for maintaining peak readings
• Professional-grade threaded adapters for leak-proof seals
• Extended hoses for hard-to-reach applications
• Large, easy-to-read 2-3/4 Inch diameter gauge
• Adapters to fit engines as small as lawnmowers, chainsaws, and trimmers
• Quick-disconnect coupler for easy accessory changes
• Manual pressure release for maintaining peak readings
• Professional grade threaded adapters for leak-proof seals
• Extended hoses for hard to reach applications
• Large, easy-to-read 2 3/4″ (70 mm) diameter gauge
• Adapters to fit engines as small as lawnmowers, chainsaws, and trimmers
• Quick disconnect coupler for easy accessory changes
• Includes: 2-3/4″ (70 mm) gauge with high impact lens, rubber boot, and four (4) scales of measure (psi, kg/cm2, bar, kPa), attached to 10″ (250 mm) long hose and quick release coupler
• 14 mm short-thread adapter with 6 1/2″ (165 mm) and 12″ (305 mm) long hoses
• 14 mm long-thread adapter with 12″ (305 mm) long hose
• 18 mm short-thread adapter with 12″ (305 mm) long hose
• 14 mm short-thread x 18 mm long-thread adapter
• 10 mm thread small engine adapter
• 12 mm thread small engine adapter
• Quick-release air hold adapter
• Custom blow-molded case
• Field service kit
• User manual (English/Spanish/French)

Specifications: